Using a vinyl and mirror wardrobe doors would
eventually need a repair or replacement. In many cases, it becomes harder to
open and close the sliding door because the rollers wear out. If you face any
such situation the first check the roller track for any debris or thing. Clean
the track often to eliminate any hassle. It is quick and easy to clean tracks.
Unfortunately, sometimes they need to be replaced. Here is a step by step guide
on replacing a sliding door.
Step
1:
Remove the Door: First and foremost
step is to remove the doors from the track. Though, it might not always be
required. But, in most of cases, the top track of the door is more profound
than the lower tracks; in such cases, you can lift the door up to clean the
road. Removing the door is also easy; all you have to do is raise the door
further up and pull the bottom inside.
Step
2:
Replacing Rollers: Almost all the Mirror Sliding Wardrobe Doors in Australia have
roller tracks. Next to remove, the track you can remove the screw holding the
roller assembly. Now, you can either remove the entire assembly or just a
roller. It is highly recommended to change the whole assembly, and it is simple
and doesn’t have to take down the door again if another roller stops working.
Step
3:
Adjust the Rollers: In the final
step all you have to do is adjust the door rollers. A screwdriver can help you
to turn the adjustment screw. By turning the screw clockwise motion, you can
move roller down and the door up. Use the other side motion on the assembly of
the door.
Vinyl Sliding Wardrobe Doors in Australia comes in different size
and shapes. The aforementioned steps will help you to maintain your door for a
long duration of time. Make sure to follow the step as it is for proper
results.